No sound comes out
No sound is produced. Or sound is distorted.
Check the connections for all devices. link
Insert connection cables all the way in.
Check that input connectors and output connectors are not reversely connected.
Check cables for damage.
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. link
Securely tighten the speaker terminals. Check speaker terminals for looseness. link
Check that the proper input source is selected. link
Adjust the volume. link
Cancel the mute mode. link
Check that the correct input source is selected when audio is being input to this unit from an external device. link
Check the digital audio output setting on the connected device. The initial settings may be off depending on the device.
When a headphone plug is inserted into the headphone jack of the unit, no sound is output from the speakers. link
Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.
To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device. link
It may be that only speaker A or speaker B is selected. Make sure the speakers are correctly connected then push the SPEAKER A/B button to check. link