Search result
Adjusting the left and right channel balance
The volume level of the left and right channels can be trimmed in 0.5 dB steps across a 0.0 - 9.0 dB range.
The factory default setting is 0.0 dB (maximum).
Press MODE/TRIM.
The unit enters the level adjustment mode.
The left channel level value flashes.
Use
to adjust the left channel level.
![shirosankaku](fig/shirosankaku_UJDCILqvkqkfhn.png)
![shirosankaku-Reverse](fig/shirosankaku-Reverse_UJDCILjttfswkn.png)
Press
.
![White-Arrow-Right](fig/migi_sankaku_siro_GFNFILhponktcg.png)
The adjustment mode selects the right channel.
The right channel level value flashes.
Use
to adjust the right channel level.
![shirosankaku](fig/shirosankaku_UJDCILqvkqkfhn.png)
![shirosankaku-Reverse](fig/shirosankaku-Reverse_UJDCILjttfswkn.png)
Press MODE/TRIM.
The unit exits the adjustment mode.
If you have connected a “SLAVE” device using the F.C.B.S. connection link, proceed to the slave setting.