Overview

Connections

Connecting speakers

Connecting the speaker cables

Connecting speakers

Connecting the subwoofer

Connecting a playback device

Connecting a recording device

Connecting to a device with digital audio connectors

Connecting a USB flash drive to the USB port

Connecting to a home network (LAN)

Wired LAN

Wireless LAN

Connecting a pre-amplifier

Connecting devices with remote control connectors

Performing operations by RC on this unit without visual contact

Remotely connecting Marantz audio devices

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Playing CDs

Listening to music on a Bluetooth device

Pairing with other Bluetooth devices

Reconnecting to this unit from a Bluetooth device

Listening to audio on Bluetooth headphones

Reconnecting to a Bluetooth headphones

Disconnecting Bluetooth headphones

Playing digital input

Getting the HEOS App

Setting up the HEOS App for the first time with a HEOS built-in device

Adding the registration of HEOS built-in devices in the HEOS App

HEOS Account

Playing from streaming music services

Listening to the same music in multiple rooms

Listening to Internet Radio

Playing music stored on your mobile

Playing back files stored on a PC or NAS

Playing music from a USB flash drive

AirPlay function

Playing songs from your iPhone, iPod touch or iPad

Playing iTunes music with this unit

Play a song from your iPhone, iPod touch or iPad on multiple synced devices (AirPlay 2)

Spotify Connect function

Playing Spotify music with this unit

Convenience functions

Adjusting the tone and balance

Playback in source direct mode

Switching the display’s brightness

Using the sleep timer

Recording

Using this unit as a power amplifier

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Sound is interrupted or noise occurs

Desired sound does not come out

AirPlay cannot be played back

USB flash drives cannot be played back

Bluetooth cannot be played back

The Internet radio cannot be played back

Music files on PC or NAS cannot be played back (Music server)

Various online services cannot be played

Cannot connect to a wireless LAN network

Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)

The input source switches to “HDMI ARC”, “Optical” or “Coaxial”

The HDMI control function does not work

Update/upgrade error messages

Restoring the firmware to the factory defaults

Appendix

Playing back a USB flash drives

D/A converter

Playing back a Bluetooth device

Playing back files stored on a PC and NAS

Playing back Internet Radio

Last function memory

About HDMI

Explanation of terms

Trademark information

No sound comes out

No sound comes out of speakers.

Check the connections for all devices. link

Insert connection cables all the way in.

Check that input connectors and output connectors are not reversely connected.

Check cables for damage.

Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. link

Securely tighten the speaker terminals. Check speaker terminals for looseness. link

Check that the proper input source is selected. link

Adjust the volume. link

Cancel the mute mode. link

Check that the correct input source is selected when audio is being input to this unit from an external device. link

Check the digital audio output setting on the connected device. The initial settings may be off depending on the device.

No sound is output from the speaker terminals or the preout connector when headphones are connected. link

Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.

To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device. link