Connecting devices with remote control connectors
When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly.
Next, configure the “Connections” and “Settings”.
Use the supplied remote connector cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier.
Turn the EXTERNAL/INTERNAL switch on the unit to “EXTERNAL”.
This setting will disable remote sensor reception of this unit.
To operate the unit, point the remote control at the remote sensor of the amplifier.
To use this unit by itself without connecting an amplifier, turn the switch to “INTERNAL”.