Search result
Speaker configuration and “Amp Assign” settings
This system configuration plays back 13-channels. You can create speaker systems such as a bi-amp connection by changing the “Amp Assign” settings.
Perform “Amp Assign” settings to suit the speaker configuration to be installed. link
|
Playback speaker in MAIN ZONE |
“Amp Assign” settings |
Connection page |
|---|---|---|
|
5.1-channel playback |
13.1ch (Default) |
|
|
7.1-channel playback |
13.1ch (Default) |
|
|
9.1-channel playback |
13.1ch (Default) |
|
|
13.1-channel playback |
13.1ch (Default) |
|
|
13.1-channel playback (Dolby Atmos and Auro-3D) |
13.1ch (Default) |
|
|
11.1-channel playback (bi-amp connection of front speakers) |
11.1ch (Bi-Amp) |
|
|
11.1-channel playback + second pair of front speakers |
11.1ch + Front B |
The sound mode that can be selected varies according to the speaker configuration. See “Sound modes and channel output” link for the sound modes that are supported.
The following pages provide basic connection examples.
Refer to the example connection for Example connection for the Auro-3D 9.1-channel systemlink when playing Auro-3D with a 9.1-channel system using the basic 5.1-channel system and the front height and surround height speakers.
Also refer to the connection example for Example connection for the Auro-3D 13.1-channel systemlink when playing Auro-3D with a 13.1-channel system by adding the Surround Back, Top Surround and Center Height speakers.
