Search result
Amp Assign
You can change the Pre Amplifier assignment according to your speaker system.
Assign Mode
Select how to use the Pre Amplifier.
You need to configure the detailed settings for the speaker configuration in accordance with the selected mode. Select Assign Mode configure the corresponding detailed settings.
13.1ch |
All Pre Amplifiers of this unit are used for MAIN ZONE. You can connect speakers for up to 15.1-channels for MAIN ZONE. The pre-out output automatically switches for playing back up to 13.1-channels in accordance with the input signal and sound mode when 15.1-channel speakers are installed. |
11.1ch (Bi-Amp): |
The Pre Amplifier of this unit is assigned to 2-channels for creating bi-amp connections with the front speaker. You can connect speakers for up to 11.1-channels for MAIN ZONE. |
11.1ch + Front B: |
The Pre Amplifier of this unit is assigned to 2-channels for connecting to the second front speaker. You can switch between the desired combination of front speakers A and front speakers B. Switch the front speaker using the “Front Speaker” setting. link |
Pre-out for Bi-Amp / Pre-out for Front B
When “Assign Mode” is set to “11.1ch (Bi-Amp)” or “11.1ch + Front B” in the menu, select the PRE OUT connectors used for bi-amp or second pair front speakers.
HEIGHT 2: |
The assigned channels are output from the HEIGHT2 PRE OUT connectors. Up to one pair of height, ceiling, and Dolby Atmos Enabled channels can be used. |
HEIGHT 3 |
The assigned channels are output from HEIGHT3 PREOUT connectors. Up to two pairs of height, ceiling, and Dolby Atmos Enabled channels can be used. The front wide channel cannot be used. |
SURROUND BACK: |
The assigned channels are output from the SURROUND BACK PRE OUT connectors. The surround back channel cannot be used. |
Floor
Layout
Select the floor speakers location.
5ch & SB & FW: |
This layout combines a surround back or front wide speaker with the basic 5-channel layout. |
5ch & SB |
This layout combines a surround back speaker with the basic 5-channel layout. |
5ch & FW: |
This layout combines a front wide speaker with the basic 5-channel layout. |
5ch: |
This is a basic 5-channel layout that uses front speakers, center speakers and surround speakers. |
Height
Height Sp
Select the number of the height speakers and ceiling speakers used in MAIN ZONE.
None: |
Uses no height and ceiling speakers. |
2ch: |
Uses a set of (two) height speakers or ceiling speakers. |
4ch |
Uses two sets of (four) height speakers or ceiling speakers. |
5ch: |
Uses five height or ceiling speakers. |
6ch: |
Uses six height or ceiling speakers. |
7ch: |
Uses seven height or ceiling speakers. |
8ch: |
Uses eight height or ceiling speakers. |
Select the “5ch” setting or higher when using Top Surround or Center Height speakers.
Dolby Sp
Select the number of the Dolby Atmos Enabled speakers used in MAIN ZONE.
None |
Uses no Dolby Atmos Enabled speakers. |
2ch: |
Uses a set of (two) Dolby Atmos Enabled speakers. |
4ch: |
Uses two sets of (four) Dolby Atmos Enabled speakers. |
6ch: |
Uses three sets of (six) Dolby Atmos Enabled speakers. |
Layout
Set the speaker layout when installing 1 set (2-channels) of Height, Ceiling or Dolby Atmos Enabled speakers.
The layouts that can be selected differ depending on the combinations of “Assign Mode” and “Floor” - “Layout” in the menu. (Assign Modelink, “Floor” - Layoutlink)
Settings |
AUDIO OUT connectors |
|||||
---|---|---|---|---|---|---|
Height Sp |
Dolby Sp |
Layout |
HEIGHT 1 |
HEIGHT 2 |
HEIGHT 3 |
HEIGHT 4/FRONT WIDE |
None |
None |
- |
- |
- |
- |
- |
2ch |
None |
Front Height |
Front Height |
- |
- |
- |
Top Front |
Top Front |
- |
- |
- |
||
Top Middle |
Top Middle |
- |
- |
- |
||
Top Rear |
Top Rear |
- |
- |
- |
||
Rear Height |
Rear Height |
- |
- |
- |
||
None |
2ch |
Front Dolby |
Front Dolby |
- |
- |
- |
Surround Dolby |
Surround Dolby |
- |
- |
- |
||
Back Dolby |
Back Dolby |
- |
- |
- |
This can be selected when using Surround Back speakers. Set “Floor” - “Layout” in the menu to “5ch & SB” or “5ch & SB & FW”. link
Front Layout / Middle Layout / Rear Layout
Set the speaker layout when installing 2 sets (4-channels) or more of Height, Ceiling or Dolby Atmos Enabled speakers.
The layouts that can be selected differ depending on the combinations of “Assign Mode” and “Floor” - “Layout” in the menu. (Assign Modelink, “Floor” - Layoutlink)
Settings |
AUDIO OUT connectors |
||||||||
---|---|---|---|---|---|---|---|---|---|
Height Sp |
Dolby Sp |
NOTE |
Front Layout |
Middle Layout |
Rear Layout |
HEIGHT 1 |
HEIGHT 2 |
HEIGHT 3 |
HEIGHT 4/FRONT WIDE |
2ch |
2ch |
|
Front Dolby |
- |
Top Rear |
Front Dolby |
Top Rear |
- |
- |
Front Dolby |
- |
Rear Height |
Front Dolby |
Rear Height |
- |
- |
|||
Front Height |
- |
Surround Dolby |
Front Height |
Surround Dolby |
- |
- |
|||
Front Height |
- |
Back Dolby 1 |
Front Height |
Back Dolby |
- |
- |
|||
Top Front |
- |
Surround Dolby |
Top Front |
Surround Dolby |
- |
- |
|||
Top Front |
- |
Back Dolby 1 |
Top Front |
Back Dolby |
- |
- |
|||
4ch |
None |
|
Front Height |
- |
Top Middle |
Front Height |
Top Middle |
- |
- |
Front Height |
- |
Top Rear |
Front Height |
Top Rear |
- |
- |
|||
Front Height |
- |
Rear Height 2 |
Front Height |
Rear Height |
- |
- |
|||
Front Height |
- |
Surr. Height |
Front Height |
Surr. Height |
- |
- |
|||
Top Front |
- |
Top Rear |
Top Front |
Top Rear |
- |
- |
|||
Top Front |
- |
Rear Height |
Top Front |
Rear Height |
- |
- |
|||
Top Middle |
- |
Rear Height |
Top Middle |
Rear Height |
- |
- |
Settings |
AUDIO OUT connectors |
||||||||
---|---|---|---|---|---|---|---|---|---|
Height Sp |
Dolby Sp |
NOTE |
Front Layout |
Middle Layout |
Rear Layout |
HEIGHT 1 |
HEIGHT 2 |
HEIGHT 3 |
HEIGHT 4/FRONT WIDE |
None |
4ch |
|
Front Dolby |
- |
Surround Dolby |
Front Dolby |
Surround Dolby |
- |
- |
Front Dolby |
- |
Back Dolby 1 |
Front Dolby |
Back Dolby |
- |
- |
|||
5ch |
None |
|
Front Height |
Top Surround |
Rear Height 2 |
Front Height |
Rear Height |
L: Top Surround |
- |
Front Height |
Surr. Height & Top Surround |
None |
Front Height |
Surr. Height |
L: Top Surround |
- |
|||
Front Height & Center Height |
None |
Rear Height 2 |
Front Height |
Rear Height |
R: Center Height |
- |
|||
Front Height & Center Height |
Surr. Height |
None |
Front Height |
Surr. Height |
R: Center Height |
- |
|||
6ch |
None |
3 |
Front Height |
Surr. Height |
Rear Height |
Front Height |
Rear Height |
Surr. Height |
- |
|
Front Height & Center Height |
Top Surround |
Rear Height |
Front Height |
Rear Height |
L: Top Surround |
- |
||
Front Height & Center Height |
Surr. Height & Top Surround |
None |
Front Height |
Surr. Height |
L: Top Surround |
- |
|||
4 |
Front Height |
Top Middle |
Rear Height |
Front Height |
Rear Height |
Top Middle |
- |
||
Top Front |
Top Middle |
Top Rear |
Top Front |
Top Rear |
Top Middle |
- |
Settings |
AUDIO OUT connectors |
||||||||
---|---|---|---|---|---|---|---|---|---|
Height Sp |
Dolby Sp |
NOTE |
Front Layout |
Middle Layout |
Rear Layout |
HEIGHT 1 |
HEIGHT 2 |
HEIGHT 3 |
HEIGHT 4/FRONT WIDE |
4ch |
2ch |
|
Front Height |
Surround Dolby |
Rear Height |
Front Height |
Rear Height |
Surround Dolby |
- |
Top Front |
Surround Dolby |
Top Rear |
Top Front |
Top Rear |
Surround Dolby |
- |
|||
2ch |
4ch |
|
Front Height |
Surround Dolby |
Back Dolby 1 |
Front Height |
Back Dolby |
Surround Dolby |
- |
Front Dolby |
Top Middle |
Back Dolby 1 |
Front Dolby |
Back Dolby |
Top Middle |
- |
|||
Front Dolby |
Surround Dolby |
Rear Height |
Front Dolby |
Rear Height |
Surround Dolby |
- |
|||
None |
6ch |
|
Front Dolby |
Surround Dolby |
Back Dolby 1 |
Front Dolby |
Back Dolby |
Surround Dolby |
- |
7ch |
None |
5 |
Front Height |
Top Middle & Top Surround |
Rear Height |
Front Height |
Rear Height |
Top Middle |
L: Top Surround |
Front Height & Center Height |
Top Middle |
Rear Height |
Front Height |
Rear Height |
Top Middle |
R: Center Height |
|||
5ch |
2ch |
5 |
Front Height |
Surr. Dolby & Top Surround |
Rear Height |
Front Height |
Rear Height |
Surround Dolby |
L: Top Surround |
Front Height & Center Height |
Surround Dolby |
Rear Height |
Front Height |
Rear Height |
Surround Dolby |
R: Center Height |
Settings |
AUDIO OUT connectors |
||||||||
---|---|---|---|---|---|---|---|---|---|
Height Sp |
Dolby Sp |
NOTE |
Front Layout |
Middle Layout |
Rear Layout |
HEIGHT 1 |
HEIGHT 2 |
HEIGHT 3 |
HEIGHT 4/FRONT WIDE |
8ch |
None |
5 |
Front Height & Center Height |
Top Middle & Top Surround |
Rear Height |
Front Height |
Rear Height |
Top Middle |
L: Top Surround |
6ch |
2ch |
5 |
Front Height & Center Height |
Surr. Dolby & Top Surround |
Rear Height |
Front Height |
Rear Height |
Surround Dolby |
L: Top Surround |
This can be selected when using Surround Back speakers.
For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in place of Surround Height speakers.
Use 2 sets of Height speakers in the appropriate sound modes for Dolby Atmos, DTS:X or Auro-3D playback.
Use the Front Height and Rear Height speakers for Dolby Atmos or DTS:X playback.
Use the Front Height and Surround Height speakers for Auro-3D playback.
This can be set when “Floor” - “Layout” is set to “5ch” or “5ch & SB”. link
This combination cannot be selected when Front Wide speakers are being used.
View Terminal Config.
This shows how to connect the PRE OUT connectors for your “Amp Assign” setting on the menu screen.