Overview

Connections

Playback

Settings

Tips

Appendix

Changing the settings

Set the items below to the settings you want to register.

The following settings from sanwacirnumw_1 to sanwacirnumw_9 can be memorized for MAIN ZONE, and settings sanwacirnumw_1 and sanwacirnumw_2 can be memorized for ZONE2.

Input source link
Volume link
Sound mode link
Audyssey (Audyssey MultEQ® XT, Audyssey Dynamic EQ®, Audyssey Dynamic Volume®) link
M-DAXlink
Adjusting the volume of each channel to match the input source (Channel Level Adjust)link
Displaying your desired video during audio playback (Video Select)link
Adjusting the picture quality for your viewing environment (Picture Mode)link
“HDMI Video Output”link

Press and hold SMART SELECT while a radio station is being received is being played back with any of the following sources, the current radio station is memorized.

Tuner / Internet Radio Station

Press MAIN or ZONE2 to select the operating zone with the remote control.

The button for the selected zone is lit.

Press and hold the desired SMART SELECT until “Smart Flower Mark Memory” or “Z2 Smart Flower Mark Memory” appear on the display.

The current settings will be memorized.

Flower Mark is displayed the number for the SMART SELECT button you pressed.

Changing the Smart Select Name

The MAIN ZONE Smart Select name displayed on the TV screen or display of this unit can be changed to a different name.

For the name change method, see “Smart Select Names”link.

back to top