Overview

Accessories

Inserting the batteries
Operating range of the remote control unit
Part names and functions

Front panel
Rear panel
Remote control unit

Connections

Connections
Connecting an amplifier
Connecting to a device with digital audio input connectors
Connecting to a device with digital audio output connectors
Connecting a PC or Mac
Connecting a USB flash drive to the USB port
Connecting an external control device

FLASHER IR IN jack
REMOTE CONTROL connectors
Connecting the power cord

Playback

Basic operation

Turning the power on
Switching the power to standby
Selecting the input source
Switching the display’s brightness
Turning the illumination and display on/off
Playing CDs/Super Audio CDs

Playing CDs and Super Audio CDs
Setting the top priority playback layer for Super Audio CDs
Playing Data CDs and Data DVDs

Playing files
Playing a USB flash drive

Playing files stored on USB flash drives
Using as a D/A converter

Connecting and playing back from a computer (USB-DAC)
Connecting and playing back from a digital device (Coaxial/Optical 1/Optical 2)

Settings

Menu map

Menu operation
Audio

Filter
Dither
Noise Shaper
Digital Out
HP Amplifier Gain
Resume Play
General

Illumination
Auto-Standby
Disabling amplifier/streaming preamplifier operating mode on remote control

Disabling amplifier operating mode
Disabling streaming preamplifier operating mode
Setting the device to be operated by the volume buttons on the remote control

Setting the device to be operated by the volume buttons in SACD player operating mode

Tips

Tips
Troubleshooting

Power does not turn on / Power is turned off
Operations cannot be performed through the remote control unit
Display on this unit shows nothing
No sound comes out
Sound is interrupted or noise occurs
Desired sound does not come out
USB flash drives cannot be played back
Cannot playback Discs
There is a delay before the disc tray starts to open
Music files on PC or Mac cannot be played back (USB-DAC)
Audio from digital devices cannot be played back (Coaxial/Optical)

Appendix

Playing back Discs
Playing back a USB flash drives
Playback order of music files
About discs and files
Cautions on using media

Loading discs
How to handle media
Cleaning discs
Digital input
Explanation of terms
Specifications
Dimensions / Weight
Index
PDF Download

Connecting an amplifier

Conne AnalogOut SACD10

About balanced connectors

This unit has both unbalanced and balanced connectors. The balanced connectors have three pins, making it possible to transmit audio signals as a balanced signal, reducing the effect of external noise. They also have a removable lock mechanism, which reduces shaking in the connector area, making the connection highly reliable.

The balanced connection is an all-stage balanced configuration.

Conne amp XLR SACD10

Phases of the balanced connectors

The XLR connector is internally wired in either of the following two systems. This unit employs the European system.

European system ( shiromaru_2 PIN=HOT/ shiromaru_3 PIN=COLD)

Balance terminal EURO

USA system ( shiromaru_2 PIN=COLD / shiromaru_3 PIN=HOT)

Balance terminal USA

If a product that employs the USA system is connected with this unit via a balanced cable, the output signal may be phase-inverted. To correct the inversion, connect the one side XLR connector reversing the shiromaru_2 PIN and shiromaru_3 PIN.

back to top