Menu map

This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality.

This function adds audio data to minimize quantization error. Audio data to be added can be set on this unit. The sound quality changes. Set as desired.

Improves linearity and noise characteristics in the audible range using digital feedback. The measurements are the same but the sound quality changes. Set as desired.

Stopping digital audio output reduces a source of noise that affects sound quality, enabling higher sound quality playback.

Set the gain of the headphone amplifier.

When the input source is switched, the USB flash drive is disconnected and then connected, or the power is turned off and then back on during USB flash drive playback, the unit memorizes the point where playback stopped so that playback can resume from the beginning of that track.

This function adjusts the illumination of the front panel and the brightness of the display. It also enables linkage of the front panel illumination to the brightness of the display. When the brightness is turned “Off”, the noise source affecting the sound quality is suppressed, and high-quality sound playback is possible.

Sets whether to automatically switch the unit to the standby mode when there is no audio input and no operations are performed for more than 15 minutes.