Rear panel

Name Rear small PM7000N 1

Bluetooth/wireless LAN antenna connectors

Used to connect the included external antennas for Bluetooth/wireless connectivity when connecting to a network via wireless LAN, or when connecting to a handheld device via Bluetooth. link

Place the external antennas for Bluetooth/wireless connectivity evenly over the screw terminal of rear.
Turn clockwise until the antennas is fully connected.
Rotate the antenna upwards for best reception.
Pict AntennaAngle PM7000N

DIGITAL AUDIO IN connectors

Used to connect devices equipped with digital audio output connectors. link

This is used to connect USB storages (such as USB memory devices). link

NETWORK connector

Used to connect to a LAN cable when connecting to a wired LAN network. link

SIGNAL GND terminal

Used to connect a ground wire for the turntable. link

Speaker terminals (SPEAKERS)

Used to connect speakers. link

Name Rear small PM7000N 2

REMOTE CONTROL connectors

Used to connect to a Marantz audio device that is compatible with the remote control function. link

AC inlet (AC IN)

Used to connect the power cord. link

AUDIO IN connectors

Used to connect devices equipped with analog audio output connectors.

AUDIO OUT connectors

Used to connect the input connector of a recorder. link

PRE OUT connector

Used to connect a subwoofer with a built-in amplifier. link

back to top