Search result
Specifications
Audio amplifier
RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) : |
60 W x 2 (8 Ω/ohms load) |
Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) : |
0.02 % |
Frequency response (CD, 1 W, 8 Ω/ohms load) : |
5 Hz – 100 kHz ±3 dB |
Dumping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : |
100 and over |
Input sensitivity/impedance: |
PHONO (MM): 2.0 mV / 47 kΩ/kohms |
Output voltage: |
SUBWOOFER OUT: 240 mV |
Maximum allowable PHONO input level (1 kHz) MM : |
80 mV |
RIAA deviation (20 Hz – 20 kHz) : |
±0.5 dB |
S/N (IHF-A, 8 Ω/ohms load): |
PHONO (MM): 87 dB (5 mV input, 1 W output) |
Tone control: |
BASS (50 Hz): ±10 dB |
Wireless LAN section
Network type (wireless LAN standard): |
Conforming to IEEE 802.11a/b/g/n |
Security: |
WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) |
Used frequency range: |
2.4 GHz, 5 GHz |
The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Bluetooth section
Communications system: |
Bluetooth Specification Version 4.1 |
Transmission power: |
Bluetooth Specification Power Class 1 |
Maximum communication range: |
Approx. 30 m in line of sight ∗2 |
Used frequency range: |
2.4 GHz |
Modulation scheme: |
FHSS (Frequency-Hopping Spread Spectrum) |
Supported profiles: |
A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.5 |
Corresponding codec: |
SBC |
Transmission range (A2DP): |
20 Hz – 20,000 Hz |
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
General
Operating temperature: |
+5 ℃ - +35 ℃ |
Power supply: |
AC 230 V, 50/60 Hz |
Power consumption: |
220 W |
Power consumption in standby modes : |
Standby modes |
Setting items in the menu |
Power consumption |
|
---|---|---|---|
Network Control |
Auto-Play |
||
Optical standby (Auto-Play-“On”) |
Off |
On |
0.7 W |
Normal standby (Auto-Play-“Off”) |
Off |
Off |
0.4 W |
Network standby (Bluetooth) / (Wi-Fi) ∗3 |
On |
On |
5.8 W |
Network control (Ethernet) ∗3 |
On |
On |
4.7 W |
When this unit enters standby after audio playback using the function in parentheses.
For purposes of improvement, specifications and design are subject to change without notice.