Specifications

RMS Power output (Simultaneous drive of both channels) :

100 W x 2 (8 Ω/ohms load, 1 kHz, T.H.D. 0.05 %)

200 W x 2 (4 Ω/ohms load, 1 kHz, T.H.D. 0.1 %)

Total harmonic distortion
(1 kHz, simultaneous drive of both channels, 100 W, 8 Ω/ohms load) :

0.005 %

Frequency response (CD, 1 W, 8 Ω/ohms load) :

5 Hz – 50 kHz ±3 dB

Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) :

500

Input sensitivity/Input impedance

PHONO (MC) :

250 μV / 100 Ω/ohms

PHONO (MM) :

2.3 mV/39 kΩ/kohms

CD/LINE/RECORDER :

220 mV/13 kΩ/kohms

POWER AMP :

1.1 V/13 kΩ/kohms

Maximum allowable PHONO input level (1 kHz)

MC :

8 mV

MM :

80 mV

RIAA deviation (20 Hz – 20 kHz) :

±0.5 dB

S/N (IHF-A, 8 Ω/ohms load)

PHONO (MC) :

75 dB (0.5 mV Input)

PHONO (MM) :

88 dB (5 mV Input)

CD/LINE/RECORDER :

107 dB (Rated output)

Tone Control

BASS (50 Hz) :

±6 dB

TREBLE (20 kHz) :

±6 dB

Power supply :

AC 230 V, 50/60 Hz

Power consumption :

130 W

Power consumption in standby mode :

0.2 W

For the purpose of improvement, the specifications and design are subject to change without notice.

back to top