The display circuit operation can be stopped to minimize noise from the display and the display circuit which could interfere with the analog audio output signal.

Press DISPLAY.

Each time you press DISPLAY, the display and the illumination lamp (blue) switch on/off at the same time.

If you operate the VOLUME knob or another control when the display is off, the display turns on again. When operation is finished, the display turns off automatically after approximately 2 seconds.

Playback

Turning the power on

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Adjusting the left and right channel balance

Having the display and the illumination lamp off

Having the illumination lamp always off

Playing CDs

Recording