Search result
PHONO
Sets the phono equalizer of this unit according to the type or impedance of the turntable cartridge to be connected.
|
MM |
Set this for an MM cartridge. |
|
MC Low: |
Use this setting for an MC cartridge of less than 10 Ω/ohms. |
|
MC High: |
Use this setting for an MC cartridge of 10 Ω/ohms or higher. |
NOTE
If this setting change operation is performed, playback sound is output approximately 10 seconds after the change. (The standby indicator blinks in red until the unit is able to be used.)