Required system
Broadband Internet connection
Modem
Device that connects to your broadband internet provider, and is very often supplied with the service. A type that is integrated with a router is also often available.
Router
When using this unit, we recommend you use a router equipped with the following functions:
Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater.
LAN cable (CAT-5 or greater recommended)
Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores.
The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise.
When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at “Network connection (when “DHCP” settings is “Off”)” link.
With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically.
With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. When this unit is connected to a network that does not have the DHCP function, configure settings such as the IP address, etc. in “Network connection (when “DHCP” setting is “Off”)”link.
When setting manually, check the setting contents with the network administrator.
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband connection to the Internet.
The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details.
Marantz assumes no responsibility whatsoever for any communication errors or troubles resulting from customer’s network environment or connected devices.
This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE.
Do not connect an NETWORK connector directly to the LAN port / Ethernet connector on your computer.
To listen to audio streaming, use a router that supports audio streaming.