For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.

Setting items	Detailed items	Description	Page
Audio	Filter	This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality.	link
	Lock Range	Narrowing down the “Lock Range” setting reduces jittering, providing clearer sound.	link
	Variable Out	You can stop the circuit that outputs audio from the analog audio output terminals (VARIABLE) of this unit. This prevents the audio signal output from the analog audio output terminals (FIXED) from being affected.	link
	Volume Limit	Make a setting for the maximum volume of the audio signal output from the analog audio output terminals (VARIABLE).	link
	Phones	The headphones circuit operation can be stopped to minimize noise from the headphones circuit which could interfere with the analog audio output signal.	link
	H/P Amplifier Gain	Set the gain of the headphone amplifier. By setting according to the impedance of your headphone, you can enjoy playing headphones at an appropriate volume.	link

Setting items	Detailed items		Description/Detailed items	Page
General	Language		Sets the language for display the menu.	link
	Auto-Standby		Sets the unit power to standby when the unit is not in use.	link
	Usage Data		Selects whether or not to send anonymous usage data to Marantz.	link
	Firmware		Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications.	link
			Check for Update	link
			Auto-Update	link
			Allow Update	link
			Upgrade Notification	link
			Add New Feature	link
	Information		Displays notifications. Also, sets whether or not to display the notification when the power is turned on.	link
			Notification Alerts	link
			Check for Notifications	link
	Reset		Various settings are reset to the factory default values.	link
Network	Network Information		Displays various information about the network.	link
	Wi-Fi		The Wi-Fi function can be stopped to prevent noise that affects the sound quality.	link
	Bluetooth		Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback.	link
	Network Control		Performs the on/off settings for the network function when in standby mode.	link
	Friendly Name		Edits a name displayed on the Internet.	link
	Connection		Choose whether to connect the home network to a wireless LAN or a wired LAN.	link
		Wi-Fi	Use the wireless LAN (Wi-Fi) function to connect to a network.	link
			Auto-Scan	link
			Share Wi-Fi setting from an iOS device	link
			WPS Router	link
			Manual	link
		Wired	Use a LAN cable to connect to a network.	link
	Settings		Used for manually setting the IP address.	link
			DHCP	link
			IP Address∗1	link
			Subnet Mask∗1	link
			Gateway∗1	link
			DNS∗1	link
			Save	link
	Diagnostics		Used to check the network connection.	link
			Physical Connection∗2	link
			Router Access	link
			Internet Access	link

Displayed when the “DHCP” setting is “Off”.

When connected using a wireless LAN, “Connection Wireless (Wi-Fi)” will be displayed.

Setting items	Detailed items	Description	Page
HEOS Account	【When the user is signed out the HEOS Account】
	I have a HEOS Account	Selects to sign in.	link
	Create Account	Creates new HEOS Account.	link
	Forgot Password	If you have forgotten the password, an email explaining how to reset the password will be sent.	link
	【When the user is signed in the HEOS Account】
	Signed in As	Displays your HEOS Account.	link
	Change Location	Selects your location.	link
	Change Password	Changes your HEOS Account Password.	link
	Delete Account	Deletes your HEOS Account.	link
	Sign Out	Sign out of your HEOS Account.	link
Quick Setup	–	Performs the network settings using a Wizard style window. For details on the operations, see the separate “Quick Start Guide”.	–

Remote control unit illustration

Switching the function of the volume buttons on the remote control