Specifications

RMS Power output (Simultaneous drive of both channels) :

100 W x 2 (8 Ω/ohms load, 1 kHz, T.H.D. 0.05 %)

200 W x 2 (4 Ω/ohms load, 1 kHz, T.H.D. 0.1 %)

Total harmonic distortion
(1 kHz, simultaneous drive of both channels, 50 W, 8 Ω/ohms load) :

0.005 %

Frequency response (CD, 1 W, 8 Ω/ohms load) :

5 Hz – 50 kHz ±3 dB

Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) :

500

Input sensitivity/Input impedance

PHONO (MC Low) :

250 μV / 33 Ω/ohms

PHONO (MC Mid) :

250 μV / 100 Ω/ohms

PHONO (MC High) :

250 μV / 390 Ω/ohms

PHONO (MM) :

2.3 mV / 39 kΩ/kohms

CD/TUNER/LINE/RECORDER :

220 mV / 18 kΩ/kohms

POWER AMP :

1.0 V / 18 kΩ/kohms

Output voltage/Output impedance

PRE OUT :

1.6 V / 220 Ω/ohms

Maximum allowable PHONO input level (1 kHz)

MC Low/Mid/High:

8 mV

MM :

80 mV

RIAA deviation (20 Hz – 20 kHz) :

±0.5 dB

S/N (IHF-A, 8 Ω/ohms load)

PHONO (MC Low/Mid/High) :

75 dB (0.5 mV Input)

PHONO (MM) :

88 dB (5 mV Input)

CD/TUNER/LINE/RECORDER :

107 dB (Rated output)

Tone Control

BASS (50 Hz) :

±10 dB

TREBLE (15 kHz) :

±10 dB

Operating temperature:

+5 ℃ - +35 ℃

Power supply :

AC 230 V, 50/60 Hz

Power consumption :

150 W

Power consumption in standby mode :

0.2 W

For the purpose of improvement, the specifications and design are subject to change without notice.

back to top