Specifications

RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) :

70 W x 2 (8 Ω/ohms load)
100 W x 2 (4 Ω/ohms load)

Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) :

0.02 %

Frequency response (CD, 1 W, 8 Ω/ohms load) :

5 Hz – 100 kHz ±3 dB

Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) :

100 and over

Input sensitivity/impedance:

PHONO (MM): 1.6 mV / 47 kΩ/kohms
CD, LINE, RECORDER: 220 mV/16 kΩ/kohms
POWER AMP IN: 1.5 V/15 kΩ/kohms

Output voltage:

SUBWOOFER OUT: 220 mV

Maximum allowable PHONO input level (1 kHz) MM :

80 mV

RIAA deviation (20 Hz – 20 kHz) :

±0.5 dB

S/N (IHF-A, 8 Ω/ohms load):

PHONO (MM): 87 dB (5 mV input)
CD, LINE, RECORDER: 113 dB (rated output)
POWER AMP IN: 125 dB (rated output)

Tone control:

BASS (50 Hz): ±10 dB
TREBLE (15 kHz): ±10 dB

Network type (wireless LAN standard):

Conforming to IEEE 802.11a/b/g/n/ac
(Wi-Fi_® compliant) ∗1

Security:

WEP 64 bit, WEP 128 bit

WPA/WPA2-PSK (AES)

WPA/WPA2-PSK (TKIP)

Used frequency range:

2.4 GHz, 5 GHz

Communications system:

Bluetooth Specification Version 5.4

Transmission power:

Bluetooth Specification Power Class 1

Maximum communication range:

Approx. 98.4 ft/30 m in line of sight ∗2

Used frequency range:

2.4 GHz

Modulation scheme:

FHSS （Frequency-Hopping Spread Spectrum）

Supported profiles:

Receiver function

A2DP (Advanced Audio Distribution Profile) 1.4

AVRCP (Audio Video Remote Control Profile) 1.5

Transmitter function

A2DP (Advanced Audio Distribution Profile) 1.4

Corresponding codec:

SBC

Transmission range (A2DP):

20 Hz – 20,000 Hz

Operating temperature:

41 °F - 95 °F (5 °C - 35 °C)

Power supply:

AC 120 V, 60 Hz

Power consumption:

220 W

Power consumption in standby modes :

0.3 W

Power consumption in “Network Control” – “On” mode:

2 W