Search result
Specifications
Audio amplifier
CD player
Playable frequency response: |
10 Hz – 20 kHz |
Wow & flutter: |
Below measurable limits (± 0.001 %) |
Sampling frequency: |
44.1 kHz |
Audio amplifier
Rated output: |
2-channel driving |
Dynamic power: |
60 W + 60 W (6 Ω/ohms, 1 kHz, THD+N 10 %) |
Output terminals: |
Speaker: 4-16 Ω/ohms (impedance) |
Input sensitivity/impedance: |
Analog In : 200 mV/30 kΩ/kohms |
Total harmonic distortion
|
Analog In: 0.1 % |
S/N ratio (10 W, 6 Ω/ohms, IHF-A): |
Analog In : 90 dB |
Tone control: |
DBB : +8 dB (100 Hz) |
Frequency response: |
Analog In : 10 Hz – 40 kHz (±3 dB) |
Tuner section |
[FM] |
|
Receiving Range: |
87.50 MHz – 108.00 MHz |
|
Effective sensitivity: |
1.2 μV / 75 Ω/ohms |
|
FM Channel separation: |
42 dB (1 kHz) |
|
FM S/N ratio: |
Monaural : 70 dB |
|
FM THD+N (1 kHz): |
Monaural : 0.4 % |
|
DAB tuner section |
|
Receiving Range: |
174.928 (5A) – 239.200 (13F) MHz |
Sensitivity: |
–85 dBm |
S/N ratio: |
95 dB |
Wireless LAN section
Network type (wireless LAN standard): |
Conforming to IEEE 802.11a/b/g/n |
Security: |
WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) |
Used frequency range: |
2.4 GHz, 5 GHz |
The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Bluetooth section
Communications system: |
Bluetooth Specification Version 4.1 |
Transmission power: |
Bluetooth Specification Power Class 1 |
Maximum communication range: |
Approx. 30 m in line of sight ∗2 |
Used frequency range: |
2.4 GHz |
Modulation scheme: |
FHSS (Frequency-Hopping Spread Spectrum) |
Supported profiles: |
A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.5 |
Corresponding codec: |
SBC |
Transmission range (A2DP): |
20 Hz – 20,000 Hz |
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
Clock/Alarm/Sleep
Clock type: |
Power line frequency synchronized method (Within ±60 seconds per month) |
Alarm: |
Alarm 1/Alarm 2: 2 types |
Sleep: |
Sleep timer: Max. 90 minutes |
General
Operating temperature: |
+5 ℃ - +35 ℃ |
Power supply: |
AC 220 - 230 V, 50/60 Hz |
Power consumption: |
55 W |
Power consumption in standby modes : |
Standby modes |
Setting items in the menu |
Power consumption |
|
---|---|---|---|
Network Control |
Auto-Play |
||
Normal standby (“Auto-Play”-“On”) |
Off |
On |
0.3 W |
Normal standby (“Auto-Play”-“Off”) |
Off |
Off |
0.3 W |
Network control (Bluetooth) ∗3 |
On |
Off |
3.2 W |
Network control (Ethernet) ∗3 |
On |
Off |
3.3 W |
Network control (Wi-Fi) ∗3 |
On |
Off |
4.2 W |
Network control (USB) ∗3 |
On |
Off |
3.9 W |
Network control |
On |
On |
4.6 W |
When this unit enters standby after audio playback using the function in parentheses.
For purposes of improvement, specifications and design are subject to change without notice.