Connecting multi-drive to listen to music in two rooms

You can listen to music in different rooms using this unit with two pairs of speaker systems.

Connecting the speaker cables

Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the unit, and be sure to connect the channels and polarities correctly.

Conne Multidrive MCR612
Conne Multidrive2 MCR612

Selecting speakers to output audio

You can set up this unit to output audio from Speaker A, Speaker B, or both.

Press SPEAKER A/B.

The current setting is displayed.

Press SPEAKER A/B repeatedly to select the setting.

The setting changes each time SPEAKER A/B is pressed.

Speaker A = On :
Outputs audio from Speaker A only.

Speaker B = On :
Outputs audio from Speaker B only.

Both Speakers A and B = On :
Outputs audio from both Speaker A and Speaker B.

When using the multi-drive connection, set “Speaker Configuration” – “Amplifier Mode” in the settings menu to “Standard (A, B, or A+B)”. link

Specifying speakers to adjust the volume

When 2 sets of speakers (Speaker A/Speaker B) are connected, either Speaker A or Speaker B can be selected for volume adjustment.

Press VOLUME A/B.

The speakers whose volume is to be adjusted are shown in the unit display.

Use VOLUME  kurosankaku Sankaku-Reverse to adjust the volume.

This is only enabled when “Both Speakers A and B = On” is set for the audio output speakers.

back to top