Playback

Speaker Preset

Two speaker settings can be saved to suit the environments where you use your speakers.

For example, in some cases the characteristics of a room change depending on whether a screen is used. By saving two different presets, you can easily switch between the equalizer and speaker settings for each situation that were measured with an Audyssey® Setup.

If you want to use a preset, select the preset you want to use and then configure settings such as Audyssey® Setup or the speaker settings to save those settings to the preset you have selected.

Speaker Preset 1
(Default):

Saves the settings to Preset 1.

Speaker Preset 2:

Saves the settings to Preset 2.

The following settings are saved to presets.

“Speaker Layout” settings

“Distances” settings

“Levels” settings

“Crossovers” settings

“Subwoofer Output” settings

“Low Pass Filter” settings

“Front Speaker” settings

“MultEQ®” data

“Graphic EQ” data

This setting also be configured using “Speaker Preset” in the option menu. link

back to top