Playback

Output Settings

Makes settings for video output.

HDMI Video Output

Select the HDMI monitor connector to be used.

Auto(Dual)
(Default):

The presence of a TV connected to the HDMI OUT MONITOR 1 or HDMI OUT MONITOR 2 connector is detected automatically, and that TV connection is used.

Monitor 1:

A TV connected to the HDMI OUT MONITOR 1 connector is always used.

Monitor 2:

A TV connected to the HDMI OUT MONITOR 2 connector is always used.

If both the HDMI OUT MONITOR 1 and HDMI OUT MONITOR 2 connectors are connected and “HDMI Upscaler” is set to “Auto”, the signals are output with a resolution that is compatible with both TVs. link

You can check which resolutions are compatible with your TV in “HDMI Monitor 1” and “HDMI Monitor 2”. link

When connecting multiple Dolby Vision TVs, the signal will only be optimal for one TV. A TV connected to the HDMI OUT MONITOR 1 connector has priority.

Video Mode

Configure the video processing method to match the type of video content.

Auto
(Default):

Process video automatically based on the HDMI content information.

Game:

Always process video for game content. Minimize the video delay when the video is delayed compared to the button operations on the controller of the game console.

Movie:

Perform image processing that is suitable for contents other than games.

Bypass:

Remove all video processing from the HDMI video path.

If “Video Mode” is set to “Auto”, the mode is switched according to the input contents.

Information displays such as the volume bar cannot be overlaid with the video signal when “Video Mode” is set to “Bypass”.

This item can be set when “HDMI” is assigned for each input source.

This cannot be set when sound mode is set to “IMAX DTS” or “IMAX DTS:X”.

HDMI Upscaler

Sets the mode for upscaling 1080p and 4K HDMI content to 8K.

Auto:

Upscale 1080p and 4K HDMI video to 8K based on the monitor’s capabilities.

Off
(Default):

8K upscaler is disabled.

This item can be set when “HDMI” is assigned for each input source.

This function is not effective when the input signal is compressed video or HDR.

This cannot be set when sound mode is set to “IMAX DTS” or “IMAX DTS:X”.

This item can be set when “Video Mode” is set to anything other than “Bypass”.link

back to top