Overview

Part names and functions

Connections

Connecting a power amp

Connecting a TV

Connecting a playback device

Connecting an iPod or USB memory device to the USB port

Connecting an HD Radio receiver

Connecting to a home network (LAN)

Connecting an external control device

Connecting the power cord

Playback

Basic operation

Playing an iPod

Playing a USB memory device

Listening to music on a Bluetooth device

Listening to an HD Radio™ stations

Listening to Internet Radio

Playing back files stored on a PC and NAS

Viewing photographs on the Flickr site

Listening to Pandora®

Listening to SiriusXM Internet Radio

AirPlay function

Spotify Connect function

Convenience functions

Selecting a sound mode

HDMI control function

Sleep timer function

Smart select function

Web control function

Panel lock function

Remote lock function

Switches light illumination on/off

Playback in ZONE2/ZONE3 (Separate room)

Settings

Inputting characters

Audyssey® Setup

Operating external devices with the remote control unit

Operating learning function

Setting the back light

Specifying the zone used with the remote control unit

Tips

Troubleshooting

Resetting factory settings

Appendix

Video conversion function

Playing back a USB memory devices

Playing back a Bluetooth device

Playing back a file saved on a PC or NAS

Playing back Internet Radio

Personal memory plus function

Last function memory

Sound modes and channel output

Sound modes and surround parameters

Types of input signals, and corresponding sound modes

Explanation of terms

Trademark information

Dimensions / Weight

List of preset codes

Upgrade (Auro-3D)

Connecting a power amp

Selecting a sound mode

Update (DTS:X)

Connecting a power amp

Selecting a sound mode

Network

To use this unit by connecting it to a home network (LAN), you must configure network settings.

If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).

When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address” settings, and enter information about your home network (LAN) such as the gateway address and subnet mask, etc.