Overview

Connections

Speaker installation

Connecting speakers

Connecting a TV

Connecting a playback device

Connecting a USB memory device to the USB port

Connecting an FM/AM antenna

Connecting to a home network (LAN)

Connecting an external control device

Connecting the power cord

Playback

Basic operation

Playing a USB memory device

Listening to music on a Bluetooth device

Listening to FM/AM broadcasts

Listening to Internet Radio

Playing back files stored on a PC or NAS

Getting the HEOS App

AirPlay function

Spotify Connect function

Convenience functions

Selecting a sound mode

HDMI Control function

Smart Menu function

Sleep timer function

Smart select function

Panel lock function

Remote lock function

Switches light illumination on/off

Playback in ZONE2/ZONE3 (Separate room)

Tips

Troubleshooting

Resetting factory settings

Resetting network settings

Appendix

About HDMI

Video conversion function

Playing back a USB memory devices

Playing back a Bluetooth device

Playing back a file saved on a PC or NAS

Playing back Internet Radio

Personal memory plus function

Last function memory

Sound modes and channel output

Sound modes and surround parameters

Types of input signals, and corresponding sound modes

Explanation of terms

Trademark information

TV Format

Set the video signal format to be output for the TV you are using.

Format


NTSC (Default):	Select NTSC output.
PAL:	Select PAL output.

“Format” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting.

Press and hold the main unit’s STATUS and ZONE SELECT at the same time for at least 3 seconds.

“ Flower Mark Video Format <NTSC>” appears on the display.

Use the main unit’s

and set the video signal format.

Press the main unit’s ENTER to complete the setting.

NOTE

When a format other than the video format of the connected TV is set, the picture will not be displayed properly.