Playback

Height

Height speakers can be used with the Surround Back terminal.

Configuration

Set the speaker layout when installing 1 set (2-channels) of Height, Ceiling or Dolby Atmos Enabled speakers.

Front Height:

Front Height speakers are used.

Top Front:

Top Front speakers are used.

Top Middle:

Top Middle speakers are used.

Front Dolby:

Front Dolby speakers are used.

Surround Dolby Flower Mark :

Surround Dolby speakers are used.

No:

Height speakers are not used.

This can be selected when using Surround speakers. Set “Surround” in the menu to “Yes”. link

Can be set when “Amp Assign” is set to “7.1ch”.

Cannot be set when Surround Back speakers are being used.

Connection

Select the output terminals for audio from the speakers.

Spkr + Pre-out
(Default):

Speaker and pre-out outputs are active.

Pre-out Only:

Pre-out outputs are active. Speaker outputs are disconnected for enhanced audio quality using only the pre-out terminals.

When “Amp Assign” is set to “Preamplifier”, the “Connection” setting of all speakers will be fixed as “Pre-out Only”.

back to top