Search result
Settings
Menu operations
Set the operation zone of the remote control to MAIN ZONE.
Press SETUP.
The menu is displayed on the TV screen.
Use 
to select “Audio” - “Surround Parameter”, then press ENTER.
to select “Audio” - “Surround Parameter”, then press ENTER.Use 
to change to desired setting.
to change to desired setting.Press ENTER to enter the setting.
To return to the previous item, press BACK.
Exiting the menu, press SETUP while the menu is displayed. The menu display disappears.
Setting items
IMAX
Sets the audio mode for IMAX playback.
|
Auto |
Automatically enables the IMAX mode when IMAX content is detected. |
|
On: |
Enables IMAX settings for IMAX streaming content when automatic detection is not possible. |
|
Off: |
Disables the IMAX mode. |
In case of streaming the IMAX contents from online streaming service using TV Apps or player Apps (such as Blu-ray player’s App), this unit may not detect the signal as IMAX contents automatically. In this case, you can enable IMAX mode by setting this parameter to “On” manually.
You can set this to “On” only when a 48 kHz sampling frequency DTS 5.1 channel is being input.
IMAX Audio Settings
You can configure special IMAX audio settings to recreate the conditions of an IMAX theater.
|
Auto |
Applies the optimized speaker settings to reproduce similar to the IMAX theater environment. |
|
Manual: |
Manually adjusts the “High Pass Filter”, “Low Pass Filter” and “Subwoofer Mode”. |
You can set this when sound mode is “IMAX DTS” or “IMAX DTS:X”.
“Speakers” - “Crossovers”, “Bass” - “Subwoofer Mode” and “LPF for LFE” in the menu cannot be applied during IMAX playback.
High Pass Filter
Set the high pass filter cutoff frequency for all speakers during IMAX playback.
|
40 Hz / 60 Hz / 70 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default: 70 Hz) |
You can set this when “IMAX Audio Settings” is set to “Manual”.
Low Pass Filter
Set the low pass filter cutoff frequency of the LFE signal during IMAX playback.
|
70 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default: 70 Hz) |
You can set this when “IMAX Audio Settings” is set to “Manual”.
Subwoofer Mode
Set the bass signal to be played by the subwoofer during IMAX playback.
|
On: |
The low range signal of all speakers is added to the LFE signal output from the subwoofer. The LFE signal and the bass component of each speaker is played. |
|
Off |
Only the LFE signal is played. |
You can set this when “IMAX Audio Settings” is set to “Manual”.