Overview

Part names and functions

Connections

Speaker installation

Connecting speakers

Connecting a TV

Connecting a playback device

Connecting a USB memory device to the USB port

Connecting FM/AM antennas

Connecting to a home network (LAN)

Connecting an external control device

Connecting the power cord

Settings

Audyssey® Setup

Operating external devices with the remote control unit

Operating learning function

Setting the back light

Specifying the zone used with the remote control unit

Tips

Troubleshooting

Resetting factory settings

Resetting network settings

Restoring the firmware to the factory defaults

Appendix

Video conversion function

Playing back a USB memory devices

Playing back a Bluetooth device

Playing back a file saved on a PC or NAS

Playing back Internet Radio

Personal memory plus function

Last function memory

Explanation of terms

Trademark information

Dimensions / Weight

Switches light illumination on/off

Ope Illumination S82

You can switch the light illumination around the main display on or off.

The default setting is “On”.

Press and hold DIMMER on the main unit for 3 seconds.

Carry out the same procedure if you want to change the settings again.