Registering preset codes

There are two methods for registering preset codes; the simple method for registering preset codes of Marantz players, the method for registering the preset numbers of other manufacturers’ devices.

Registering Marantz players

Use the following simple method to register the preset codes of Marantz Blu-ray Disc players, DVD players and CD players.

Registering Blu-ray Disc players

Press and hold down Blu-ray and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.

Registering DVD players

Press and hold down DVD and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.

Registering CD players

Press and hold down CD and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.

Registering multiple players at the same time

Press and hold down SMART SELECT 1 – 4 and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.

Devices to be registered at the same time

Press and hold down the buttons

Blu-ray Disc player

DVD player

CD player

check_mark

check_mark

SMART SELECT 1 and OPTION

check_mark

check_mark

SMART SELECT 2 and OPTION

 

check_mark

check_mark

SMART SELECT 3 and OPTION

check_mark

check_mark

check_mark

SMART SELECT 4 and OPTION

NOTE

Depending on the model and year of manufacture of your device, some buttons may not operate. In this case, try “Registering by entering preset numbers” link.

Registering by entering preset numbers

The following table shows the device groups that can be registered for each of the input source select buttons. Check the preset number of the device you want to register beforehand in the “Remote Control Preset Codes” file.

Button

Device groups that can be registered

RC CBL_SAT button_Mz

CBL/SAT group

RC Blu-ray button_Mz

BD/DVD group

RC GAME button_Mz

CBL/SAT group, BD/DVD group,
Audio group

RC MEDIAPLAYER button_Mz

CBL/SAT group

RC DVD button_Mz

BD/DVD group

RC AUX button_Mz

CBL/SAT group, BD/DVD group,
Audio group

RC 8K button_Mz

CBL/SAT group, BD/DVD group,
Audio group

RC CD button_Mz

Audio group

RC TVAUDIO button_Mz

TV group

Press and hold down the input source button that you want to register the preset code to and SETUP until the DEV., TV and AVR indicators are flashing green.
Enter the preset number (4 digits) listed for the device in the Preset Code Table using the number buttons (0 – 9) on the remote control.

Some manufacturers use more than one type of preset code. Preset codes to change the number and verify correct operation.

NOTE

Depending on the model and year of manufacture of your device, some buttons may not operate.

back to top