Screen Saver

Select the screen saver setting.

A screen saver is activated if no operation is performed for more than 5 minutes when no video signal is input or when the same screen (e.g. the setup menu) is displayed.

Use shirosankaku shirosankaku-Reverse White-Arrow-Left White-Arrow-Right to clear the screen saver.


Turns screen saver on.


Turns screen saver off.

The screen saver is activated in the following cases.

When the setup menu is displayed

When no video signal is input

When the network, USB or Bluetooth playback screen is displayed

This feature will be supported via firmware update.

back to top