Search result
Tips
I want the volume not to become too loud by mistake
Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. (Volumelink, Volume Limitlink)
I want to keep the volume at the same level when I turn the power on
By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume level, set the volume level at power on for “Power On Volume” in the menu. You can set this for each zone. (Volumelink, Power On Volumelink)
I want to have the subwoofer always output audio
Depending on the input signals and sound mode, the subwoofer may not output audio. When “Subwoofer Mode” in the menu is set to “LFE+Main”, you can have the subwoofer always output audio. link
I want to make human voices in the movies clearer
Use “Center Level Adjust” in the menu to adjust the level. link
I want to keep bass and clarity during playback at a lower volume level
Set “Dynamic EQ” in the menu to “On”. This setting corrects the frequency characteristics to allow you to enjoy clear sound without the bass being lost even during playback at a lower volume level. link
I want to automatically adjust the volume level difference in content such as TV and movies
Set “Dynamic Volume” in the menu. Volume level changes (between quiet scenes and loud scenes) in TV shows or movies are automatically adjusted to your desired level. link
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one
Perform Audyssey® Setup. This automatically makes the optimized speaker settings for the new listening environment. link
I want to combine a desired video with the current music
Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from a Set-top Box or DVD, etc. while listening to music from the Tuner, CD, Phono, HEOS Music, USB or Bluetooth. link
I want to skip unused input sources
Set unused input sources for “Hide Sources” in the menu. This allows you to skip unused input sources when turning the INPUT SELECTOR knob on this unit. link
I want to enjoy the same music in all zones at the home party, etc.
Set “All Zone Stereo” in the option menu to “Start”. You can simultaneously play back music in another room (ZONE2, ZONE3) that is played back in MAIN ZONE. link
I want to minimize the delay in video signals when I’m playing a game on my game console
When the video is delayed against button operations with the controller on the game console, set “Video Mode” in the menu to “Game”. link
I want to operate this unit using the TV remote control
Select “AV Receiver” in a TV menu such as “Input” 
or “Operate Connected HDMI Device” . The Smart Menu of this unit is displayed on the TV. This Smart Menu can be operated using the remote control of your TV.
The selection method differs depending on your TV. See the owner's manual of your TV for details.
I want to use the external power amplifier to the Front channel for my 11.1-channel speaker system
Set “Pre-out” to “Front” to connect your external power amplifier for the front channels.link