Search result
Registering preset codes
There are two methods for registering preset codes; the simple method for registering preset codes of Marantz players, the method for registering the preset numbers of other manufacturers’ devices.
Registering Marantz players
Use the following simple method to register the preset codes of Marantz Blu-ray Disc players, DVD players and CD players.
Registering Blu-ray Disc players
Press and hold down Blu-ray and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.
Registering DVD players
Press and hold down DVD and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.
Registering CD players
Press and hold down CD and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.
Registering multiple players at the same time
Press and hold down SMART SELECT 1 – 4 and OPTION until the DEV., TV and AVR indicators on the remote are flashing green, then release.
|
Devices to be registered at the same time |
Press and hold down the buttons |
||
|---|---|---|---|
|
Blu-ray Disc player |
DVD player |
CD player |
|
|
|
|
|
SMART SELECT 1 and OPTION |
|
|
|
|
SMART SELECT 2 and OPTION |
|
|
|
|
SMART SELECT 3 and OPTION |
|
|
|
|
SMART SELECT 4 and OPTION |
NOTE
Depending on the model and year of manufacture of your device, some buttons may not operate. In this case, try “Registering by entering preset numbers” link.
Registering by entering preset numbers
The following table shows the device groups that can be registered for each of the input source select buttons. Check the preset number of the device you want to register beforehand in the “Remote Control Preset Codes” file.
|
Button |
Device groups that can be registered |
|---|---|
|
|
CBL/SAT group |
|
|
BD/DVD group |
|
|
CBL/SAT group, BD/DVD group, |
|
|
CBL/SAT group |
|
|
BD/DVD group |
|
|
CBL/SAT group, BD/DVD group, |
|
|
CBL/SAT group, BD/DVD group, |
|
|
Audio group |
|
|
TV group |
Press and hold down the input source button that you want to register the preset code to and SETUP until the DEV., TV and AVR indicators are flashing green.
Enter the preset number (4 digits) listed for the device in the Preset Code Table using the number buttons (0 – 9) on the remote control.
Some manufacturers use more than one type of preset code. Preset codes to change the number and verify correct operation.
NOTE
Depending on the model and year of manufacture of your device, some buttons may not operate.