Search result
Listening to an HD Radio station
Connect the antenna. (Connecting an HD Radio antennalink)
Press TUNER to switch the input source to “HD Radio”.
TV screen 
Display of this unit
Press OPTION.
The option menu screen is displayed.
Use 
to select “FM/AM”, then press ENTER.
to select “FM/AM”, then press ENTER.This displays the reception band input screen.
Use 
to select “FM” or “AM”, then press ENTER.
to select “FM” or “AM”, then press ENTER.|
FM: |
When listening to an FM broadcast. |
|
AM: |
When listening to an AM broadcast. |
Press TUNE + or TUNE - to select the station you want listen to.
Scanning is performed until it finds an available radio station. When it finds a radio station, it stops the scan automatically and tunes in.
The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency. The default setting is “Auto”. You can also use “Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.
|
Operation buttons |
Function |
|
TUNE +, – |
Selects the radio station (up/down) |
|
CH/PAGE |
Selects preset radio stations |
|
|
Selects the radio station (up/down) |
|
|
Selects preset radio stations |
|
0 – 9 |
Preset channel selection / |
