Adjusting the tone (Tone)
Adjusts the tonal quality of the sound.
Press OPTION.
The option menu screen is displayed.
Use to select “Tone”, then press ENTER.
The Tone screen is displayed.
Use to set the tone control function to on/off.
On: |
Allow tone adjustment (bass, treble). |
Off |
Playback without tone adjustment. |
Select “On” in step 3 and press to select the sound range to be adjusted.
Bass: |
Adjust bass. |
Treble: |
Adjust treble. |
Use to adjust the tone, then press ENTER.
-6 dB – +6 dB (Default : 0 dB) |
“Tone” settings are stored for each input source.
This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
This item cannot be set when “Dynamic EQ” is set to “On”. link
You cannot set this when no audio signal is input or in the menu “HDMI Audio Out” is set to “TV”. link
This cannot be set when the input mode is set to “7.1CH IN”.