Connection
Choose whether to connect the home network to a wireless LAN or a wired LAN.
When connecting to the network using wired LAN, select “Wired (Ethernet)” after connecting a LAN cable,
When connecting to the network using wireless LAN, select “Wireless (Wi-Fi)” and configure the “Wi-Fi Setup”.
Connect Using
Select the method for connecting to the home network (LAN).
Wired (Ethernet): |
Use a LAN cable to connect to a network. |
Wireless (Wi-Fi): |
Use the wireless LAN (Wi-Fi) function to connect to a network. |
You can disable the Wi-Fi function of this unit by configuring the following settings.
Press and hold the main unit’s STATUS and ZONE SELECT at the same time for at least 3 seconds.
“ Video Format <PAL>” appears on the display.
Use the main unit’s
to display “
Wired LAN <Unlock>”.
![shirosankaku-Reverse](fig/shirosankaku-Reverse_UJDCILjttfswkn.png)
![Flower Mark](fig/Flower Mark_UJDCILdjbolmii.png)
Use the main unit’s
or
to select “<Lock>”.
![White-Arrow-Left](fig/White-Arrow-Left_UJDCILtljdvqmp.png)
![White-Arrow-Right](fig/White-Arrow-Right_UJDCILvsamqkie.png)
Press the main unit’s ENTER to complete the setting.