Trigger Out 1 / Trigger Out 2
Select the conditions for activating trigger out.
For details about how to connect the DC OUT jacks, see DC OUT jacklink.
When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
Trigger out is activated through linkage to the power of the zone set to “On”.
When setting for input source
Activates trigger out when the input source set to “On” is selected.
When setting for HDMI monitor
Activates trigger out when the HDMI monitor set to “On” is selected.
|
On: |
Activate trigger on this mode. |
|
– – –: |
Do not activate trigger on this mode. |