Types of input signals, and corresponding sound modes

This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby speaker.

The default sound mode for the AirPlay playback is “Direct”.

This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.

This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.

This item can be selected when surround back speakers are used.

This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input.

This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.

This item cannot be selected when the input signal is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos.

Selectable when “Surround Parameter” - “IMAX” is set to “Auto” in the menu. link

Selectable when “Surround Parameter” - “IMAX” is set to “On” in the menu and a 48 kHz sampling frequency DTS 5.1 channel signal is being input. link

Selectable when “Surround Parameter” - “IMAX” is set to “Off”. (Selectable sound modes vary depending on the type of input signal). link

This item can be selected when the input signal is DTS-HD Master Audio.

This item can be selected when the input signal is DTS-HD Hi Resolution.

This item can be selected when the input signal is DTS 96/24.

This item can be selected when the input signals contain surround back signals.

This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.