ECO

Configure the settings of the ECO Mode and auto standby mode.

ECO Mode

This mode can reduce the power consumption when the power of the unit is on.

On:

Reduce the power consumption.

Auto:

The power consumption is automatically reduced to match the volume.

Off
(Default):

Do not reduce the power consumption.

When you want to output audio at a high volume level, it is recommended to set “ECO Mode” to “Off”.

ECO Mode can also be switched by pressing ECO  Icon Eco on the remote control unit.

Power On Default

Set the mode to ECO when the power is on.

 

Text

Last
(Default):

The ECO Mode will be set to the previous setting before the power was switched off.

On:

When power is turned on, the mode will always be switched to the ECO Mode in “On”.

Auto:

When power is turned on, the mode will always be switched to the ECO Mode in “Auto”.

Off:

When power is turned on, the mode will always be switched to the ECO Mode in “Off”.

On Screen Display

Display the power consumption of this unit using a meter on the TV screen.

Title

Text

Always On:

Always display the meter on the TV screen.

Auto
(Default):

Display the meter when changing the mode or volume.

Off:

Do not display the meter.

Auto Standby

Set so the unit power automatically switches to standby.

MAIN ZONE

Sets the time for switching to auto standby when there are no audio or video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on the unit display and the menu screen.

Title

Text

60 min:

The unit goes into standby after 60 minutes.

30 min:

The unit goes into standby after 30 minutes.

15 min
(Default):

The unit goes into standby after 15 minutes.

Off:

The unit does not go into standby automatically.

ZONE2

When there are no operations for a certain period of time as set here, the power is automatically shut off even if there is audio or video input.

Title

Text

8 hours:

Switches ZONE2 in the standby state after about 8 hours.

4 hours:

Switches ZONE2 in the standby state after about 4 hours.

2 hours:

Switches ZONE2 in the standby state after about 2 hours.

Off
(Default):

Does not automatically switch ZONE2 to the standby state.

back to top