Search result
Surround Parameter
You can adjust the surround audio sound field effects to match your preferences.
The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see Sound modes and surround parameterslink.
Some setting items cannot be set while playback is stopped. Make the settings during playback.
“Surround Parameter” settings are stored for each sound mode.
Cinema EQ
Gently softens the upper treble range of movie soundtracks to reduce possible harshness and improve clarity.
|
On: |
“Cinema EQ” is used. |
|
Off |
“Cinema EQ” is not used. |
Loudness Management
This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic range of audio recorded in the disc.
|
On |
Outputs are given based on enabling the settings made in “Dynamic Compression” and Dialogue normalization function. |
|
Off: |
“Dynamic Compression” settings and Dialogue normalization are disabled, and the signals on the disc are output as is. |
“Loudness Management” can be set when Dolby Digital, Dolby Digital Plus, Dolby TrueHD and Dolby Atmos signal is input.
Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
|
Auto: |
Automatic dynamic range compression on/off control according to source. |
|
Low / Medium / High: |
These set the compression level. |
|
Off: |
Dynamic range compression is always off. |
“Dynamic Compression” can be set when Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos or DTS signal is input.
The default setting is “Off”. When the input signal is the Dolby TrueHD or Dolby Atmos source, the default setting is “Auto”.
“Auto” cannot be set when inputting a DTS signal.
Dialog Control
Adjust the volume of dialog in movies, vocals in music, etc. so these can be heard more easily.
|
0 – 6 (Default : 0) |
This can be set when a DTS:X signal that is compatible with the Dialog Control function is input.
Low Frequency Effects
Adjust the low frequency effects level (LFE).
When “Input Mode” is set other than to “7.1CH IN”
|
-10 dB – 0 dB (Default : 0 dB) |
When “Input Mode” is set to “7.1CH IN”
|
0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB) |
For proper playback of the different sources, we recommend setting to the values below.
Dolby Digital sources : 0 dB
DTS movie sources : 0 dB
DTS music sources: -10 dB
Center Spread
Center Spread expands the center channel signal to left and right front speakers to create a wider frontal audio image for the listener. It is optimized and designed primary for playback of stereo music content.
|
On: |
Use “Center Spread”. |
|
Off |
Do not use “Center Spread”. |
You can set this when sound mode is “Dolby Surround”.
DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and optimizes them for your speaker configuration.
|
On |
Use “DTS Neural:X”. |
|
Off: |
Do not use “DTS Neural:X”. |
You can set this when sound mode is “DTS:X” or “DTS:X MSTR”.
Speaker Select
Makes settings for the speakers outputting sound.
|
Floor |
Plays back without height speakers. |
|
Floor & Height: |
Plays back with height speakers. |
This can be set when the sound mode is the original sound mode.
Subwoofer
Turn subwoofer output on and off.
|
On |
The subwoofer is used. |
|
Off: |
The subwoofer is not used. |
You can set this when the sound mode is “Direct” or “Stereo” and in the menu “Subwoofer Mode” is set to “LFE+Main”. link
Set Defaults
The “Surround Parameter” settings are returned to the default settings.