Setting items	Detailed items	Description	Page
Audio	Dialog Level Adjust	This setting adjusts the output level to clarify the dialogue output from the center channel.	link
	Subwoofer Level Adjust	This setting adjusts the volume level for the subwoofer.	link
	Surround Parameter	Adjusts surround sound parameters.	link
	M-DAX	Expands the low and high frequency components of compressed audio content such as MP3 files to enable richer audio playback.	link
	Audio Delay	Compensates for incorrect timing between video and audio.	link
	Volume	Sets the MAIN ZONE (room where the unit is located) volume setting.	link
	Audyssey	Makes Audyssey MultEQ_® XT32, Audyssey Dynamic EQ_®, Audyssey Dynamic Volume_®, Audyssey LFC_TM and Audyssey DSX_® settings.	link
	Graphic EQ	Uses the graphic equalizer to adjust the tone of each speaker.	link
Video	Picture Adjust	Adjusts picture quality.	link
	HDMI Setup	Makes settings for HDMI video/audio output.	link
	Output Settings	Makes settings for video output.	link
	On Screen Display	Configures the on-screen display settings.	link
	TV Format	Sets the video signal format to be output for the TV you are using.	link

Setting items	Detailed items	Description	Page
Inputs	Input Assign	Changes input connector assignment.	link
	Source Rename	Changes the display name for input source.	link
	Hide Sources	Removes from the display input sources that are not used.	link
	Source Level	Adjusts the playback level of the audio input.	link
	Input Select	Sets the audio input mode and decode mode.	link
Speakers	Audyssey_® Setup	The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically.	link
Speakers	Manual Setup	Sets up the speakers manually or changes the Audyssey_® Setup settings.	link
Network	Information	Displays network information.	link
	Connection	Selects whether to connect the home network to a wireless LAN or a wired LAN.	link
	Settings	Used for manually setting the IP address or when using a proxy server.	link
	Network Control	Enables network communication in standby power mode.	link
	Friendly Name	The “Friendly Name” is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences.	link
	Diagnostics	Used to check the network connection.	link
	Maintenance Mode	Used when receiving maintenance from a Marantz service engineer or custom installer. This mode is not designed for use by the end user, and should only be used by a trained service technician or custom installation professional.	link

Setting items	Detailed items	Description	Page
General	Language	Changes the language of the display on the TV screen.	link
	ECO	Configures the ECO Mode and Auto Standby energy-saving functions.	link
	ZONE2 Setup	Makes settings for audio playback with ZONE2.	link
	Zone Rename	Changes the display title of each zone to one you prefer.	link
	Smart Select Names	Changes the Smart Select Name display title to one you prefer.	link
	Trigger Out	Select the conditions for activating trigger out function.	link
	Front Display	Makes settings related to the display on this unit.	link
	Firmware	Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display.	link
	Information	Shows information about this unit settings, input signals, etc.	link
	Usage Data	Selects whether or not to send anonymous usage data to Marantz.	link
	Setup Lock	Protects settings from inadvertent changes.	link
Setup Assistant	Begin Setup...	Performs basic installation/connections/settings from the beginning according to the guidance indicated on the TV screen.	Page 9 of the separate manual “Quick Start Guide”
	Language Select	Sets individual setting items according to the guidance displayed on the TV screen.
	Speaker Setup
	Speaker Calibration
	Network Setup
	TV Audio Connection
	Input Setup