Search result
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each speaker.
Unit
Set the unit of distance.
|
Meters(Default) |
|
Feet |
Step
Set the minimum variable width of the distance.
|
0.1 m / 0.01 m (Default: 0.1 m) |
|
1 ft / 0.1 ft |
Set the distance
|
0.00 m – 18.00 m / 0.0 ft – 60.0 ft |
The speakers that can be selected differ depending on the “Amp Assign” and “Speaker Config.” settings. (Amp Assignlink, Speaker Config.link)
Default settings:
Front L / Front R / F. Height L / F. Height R / Center / Front Dolby L /
Front Dolby R / Subwoofer: 3.60 m (12.0 ft)
Speakers other than the above: 3.00 m (10.0 ft)
Set the difference in the distance between the speakers to less than 6.00 m (20.0 ft).
Dolby Speaker Setup
Set the distance between the Dolby Atmos Enabled speaker and the ceiling.
|
0.90 m - 3.30 m / 3.0 ft - 11.0 ft |
This can be set when “Front Dolby” or “Surround Dolby” is set to “Large” or “Small” in “Speaker Config.”.
Set Defaults
The “Distances” settings are returned to the default settings.