Connect and playback from a digital device (Coaxial/Optical)
The digital audio signal that is being input is shown as follows in the display.
When a linear PCM signal is input
Files are displayed in order of sampling frequency and bit length.
The displayed bit length is the bit count at the time the audio signal is input from the external device to the D/A converter of this unit.
If the sampling frequency cannot be detected, “Unlock” will be displayed.
“Unsupported” is displayed when audio signals that are not supported by this unit are input.
Specifications of supported audio formats
See D/A converterlink.
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise and could damage the speakers.