
RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) :	70 W x 2 (8 Ω/ohms load)
	100 W x 2 (4 Ω/ohms load)
Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) :	0.02 %
Output band width (8 Ω/ohms load, 0.06 %) :	5 Hz – 60 kHz
Frequency response (CD, 1 W, 8 Ω/ohms load) :	5 Hz – 100 kHz ±3 dB
Damping factor (8 Ω/ohms load, 40 Hz – 20 kHz) :	100
Input sensitivity/Input impedance
PHONO (MM) :	2.0 mV/47 kΩ/kohms
CD, TUNER, NETWORK, AUX, RECORDER :	220 mV / 20 kΩ/kohms
POWER AMP DIRECT IN :	1.6 V / 15 kΩ/kohms
Output voltage/Output impedance
PRE OUT :	1.6 V / 600 Ω/ohms
Maximum allowable PHONO input level (1 kHz) MM :	80 mV
RIAA deviation (20 Hz – 20 kHz) :	±0.5 dB
S/N (IHF-A, 8 Ω/ohms load)
PHONO (MM) :	87 dB (5 mV input, 1 W output)
CD, TUNER, NETWORK, AUX, RECORDER :	106 dB (2 V input, Rated output)
POWER AMP DIRECT IN :	125 dB (Rated output)
Tone Control
BASS (50 Hz) :	±10 dB
MID (900 Hz) :	±6 dB
TREBLE (15 kHz) :	±10 dB
Power requirement :	AC 120 V, 60 Hz
Power consumption :	220 W
Power consumption in standby mode :	0.2 W

For the purpose of improvement, the specifications and design are subject to change without notice.