Specifications

RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) :

60 W x 2 (8 Ω/ohms load)

80 W x 2 (4 Ω/ohms load)

Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) :

0.02 %

Output band width (8 Ω/ohms load, 0.06 %) :

5 Hz – 60 kHz

Frequency response (CD, 1 W, 8 Ω/ohms load) :

5 Hz – 100 kHz ±3 dB

Dumping factor (8 Ω/ohms load, 40 Hz – 20 kHz) :

100

Input sensitivity/Input impedance

PHONO (MM) :

2.0 mV/47 kΩ/kohms

CD, TUNER, NETWORK, RECORDER :

200 mV/20 kΩ/kohms

Maximum allowable PHONO input level (1 kHz) MM :

100 mV

RIAA deviation (20 Hz – 20 kHz) :

±0.5 dB

S/N (IHF-A, 8 Ω/ohms load)

PHONO (MM) :

85 dB (5 mV input, 1 W output)

CD, TUNER, NETWORK, RECORDER :

104 dB (2 V input, Rated output)

Tone Control

BASS (50 Hz) :

±10 dB

TREBLE (15 kHz) :

±10 dB

Power requirement :

AC 230 V, 50/60 Hz

Power consumption :

170 W

Power consumption in standby mode :

0.2 W

Digital input signal format

Format:

Digital audio interface (Linear PCM)

Coaxial input:

0.5 Vp-p / 75 Ω/ohms

Optical input:

More than – 27 dBm

Optical wavelength:

660 nm

For the purpose of improvement, the specifications and design are subject to change without notice.

back to top