
RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) :	40 W x 2 (8 Ω/ohms load)
	55 W x 2 (4 Ω/ohms load)
Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) :	0.08 %
Output band width (8 Ω/ohms load, 0.06 %) :	10 Hz – 50 kHz
Frequency response (CD, 1 W, 8 Ω/ohms load) :	10 Hz – 70 kHz +0 dB, –1 dB
Dumping factor (8 Ω/ohms load, 40 Hz – 20 kHz) :	100
Input sensitivity/Input impedance
PHONO (MM) :	2.2 mV/47 kΩ/kohms
CD, TUNER, NETWORK, RECORDER :	200 mV/20 kΩ/kohms
Maximum allowable PHONO input level (1 kHz) MM :	100 mV
RIAA deviation (20 Hz – 20 kHz) :	±1.0 dB
S/N (IHF-A, 8 Ω/ohms load)
PHONO (MM) :	83 dB (5 mV input, 1 W output)
CD, TUNER, NETWORK, RECORDER :	102 dB (2 V input, Rated output)
Tone Control
BASS (50 Hz) :	±10 dB
TREBLE (15 kHz) :	±10 dB
Digital input
Coaxial :	0.5 Vp-p
Optical :	–27 dBm or later
Power requirement :	AC 120 V, 60 Hz
Power consumption :	395 W
Power consumption in standby mode :	0.3 W

For the purpose of improvement, the specifications and design are subject to change without notice.