Overview

Connections

Playback

Settings

Tips

Appendix

Connect and playback from a digital device (Coaxial/Optical)

Connect digital device to this unit. link
Press the input source select button (COAXIAL or OPTICAL) to switch the input source to “COAXIAL” or “OPTICAL 1/2”.
Start playback of the digital device connected to this unit.

The COAXIAL or OPTICAL 1/2 input indicator flashes in blue if this unit cannot detect the sampling frequency of the input signal.

Use VOLUME kurosankaku Sankaku-Reverse to adjust the volume.

Specifications of supported audio formats

See D/A converterlink.

NOTE

Do not input non-PCM signals, such as Dolby Digital, and DTS. This causes noise and could damage the speakers.

If the sampling frequency switches, such as from A mode to B mode in a CS broadcast, muting may operate for 1 – 2 seconds, cutting the sound.

back to top