Specifications

RMS Power output (40 Hz – 20 kHz simultaneous drive of both channels) :

40 W x 2 (8 Ω/ohms load)

55 W x 2 (4 Ω/ohms load)

Total harmonic distortion (40 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) :

0.01 %

Output band width (8 Ω/ohms load, 0.06 %) :

10 Hz – 30 kHz

Frequency response (CD, 1 W, 8 Ω/ohms load) :

10 Hz – 50 kHz +0 dB, –1 dB

Dumping factor (8 Ω/ohms load, 40 Hz – 20 kHz) :

100

Input sensitivity/Input impedance

PHONO (MM) :

2.2 mV/47 kΩ/kohms

CD, TUNER, NETWORK, RECORDER :

200 mV/20 kΩ/kohms

Maximum allowable PHONO input level (1 kHz) MM :

110 mV

RIAA deviation (40 Hz – 20 kHz) :

±0.5 dB

S/N (IHF-A, 8 Ω/ohms load)

PHONO (MM) :

83 dB (5 mV input, 1 W output)

CD, TUNER, NETWORK, RECORDER :

103 dB (2 V input, Rated output)

Tone Control

BASS (100 Hz) :

±10 dB

TREBLE (10 kHz) :

±10 dB

Power requirement :

AC 120 V, 60 Hz

Power consumption :

350 W

Power consumption in standby mode :

0.3 W

For the purpose of improvement, the specifications and design are subject to change without notice.

back to top