Search result
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each speaker.
Unit
Set the unit of distance.
|
Feet(Default) |
|
Meters |
Step
Set the minimum variable width of the distance.
|
1 ft / 0.1 ft (Default: 1 ft) |
|
0.1 m / 0.01 m |
Set the distance
|
0.0 ft – 60.0 ft / 0.00 m – 18.00 m |
The speakers that can be selected differ depending on the “Amp Assign” and “Speaker Config.” settings. (Amp Assignlink, Speaker Config.link)
Default settings:
Front L / Front R / F. Height L / F. Height R / Center / Front Dolby L /
Front Dolby R / Subwoofer: 12.0 ft (3.60 m)
Speakers other than the above: 10.0 ft (3.00 m)
Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m).
Dolby Speaker Setup
Set the distance between the Dolby Atmos Enabled speaker and the ceiling.
|
3.0 ft - 11.0 ft / 0.90 m - 3.30 m (Default: 6.0 ft / 1.80 m) |
This can be set when “Front Dolby” or “Surround Dolby” is set to “Large” or “Small” in “Speaker Config.”.
Set Defaults
The “Distances” settings are returned to the default settings.