“Video Mode”, “i/p Scaler”, “Resolution”, “Progressive Mode” and “Aspect Ratio” settings are stored for each input source. (Video Modelink, i/p Scalerlink, Resolutionlink, Progressive Modelink, Aspect Ratiolink)

Video Mode

Configure the video processing method to match the type of video content.


Auto (Default):	Process video automatically based on the HDMI content information.
Game:	Always process video for game content. Minimize the video delay when the video is delayed compared to the button operations on the controller of the game console.
Movie:	Perform image processing that is suitable for contents other than games.
Bypass:	Remove all video processing from the HDMI video path.

If “Video Mode” is set to “Auto”, the mode is switched according to the input contents.

Information displays such as the volume bar cannot be overlaid with the video signal when “Video Mode” is set to “Bypass”.

This item can be set when “HDMI” is assigned for each input source.

i/p Scaler

Set the video input signal to be subjected to i/p Scaler processing.
i/p Scaler will convert the resolution of the input video signal to the value set in “Resolution”. link


On:	Use i/p Scaler function.
Off:	Do not use i/p Scaler function.

This item can be set when “HDMI” is assigned for each input source.

This item can be set when “Video Mode” is set to anything other than “Bypass”.link

This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601 color, Adobe RGB color, Adobe YCC601 color or computer resolutions.

Resolution

Set the output resolution.


Auto (Default):	The resolution supported by the TV connected to the HDMI MONITOR OUT connector is detected automatically and the appropriate output resolution is set.
480p/576p / 1080i / 720p / 1080p / 1080p:24Hz / 4K :	Set the output resolution.

When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in 24 Hz). For video sources and mixed sources, we recommend setting the resolution to “1080p”.

It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a resolution of 1080p/50Hz.

This item can be set when “i/p Scaler” is set to “On”. link

Progressive Mode

Set an appropriate progressive conversion mode for the source video signal.


Auto (Default):	The video signal is automatically detected and the appropriate mode is set.
Video:	Select mode suitable for video playback.
Video and Film:	Select mode suitable for video and 30-frame film material playback.

This item can be set when “i/p Scaler” is set to “On”. link

Aspect Ratio

Set the aspect ratio for the video signals output to the HDMI.


16:9 (Default):	Output at 16:9 aspect ratio.
4:3 :	Output at 4:3 aspect ratio with black bars on the sides of a 16:9 TV screen. (except for 480p/576p output)