Search result
4K Signal Format
Set the 4K signal format to be played back by this unit when the TV or playback device connected to this unit is HDMI 4K (60Hz/50Hz) signal compatible.
4K Signal Format
Set the format of the 4K signal played back by this unit.
|
Standard |
Select if your TV and playback devices support standard 4K 60p 4:2:0 8 bit video signals. |
|
Enhanced: |
Select if your TV, playback devices, and cables support high quality 4K 60p 4:4:4, 4:2:2 or 4K 60p 4:2:0 10 bit video signals. |
Relation between the “4K Signal Format” setting and supported resolutions 
|
Support Resolution |
Color Space |
Pixel Depth |
4K Signal Format |
|
|---|---|---|---|---|
|
Enhanced |
Standard |
|||
|
4K 24p, 4K 30p, 4K 25p |
RGB / |
8 bit |
|
|
|
10,12 bit |
|
– |
||
|
YCbCr 4:2:2 |
12 bit |
|
|
|
|
4K 60p, 4K 50p |
YCbCr 4:2:0 |
8 bit |
|
|
|
10,12 bit |
|
– |
||
|
RGB / |
8 bit |
|
– |
|
|
YCbCr 4:2:2 |
12 bit |
|
– |
|
When setting this to “Enhanced”, we recommend using a “Premium High Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that has an “HDMI Premium Certified Cable” label attached to the product package.
When this setting is “Enhanced”, configure the television or playback device settings to match this setting.
When this setting is “Enhanced”, video may not be output correctly depending on the connected playback device or HDMI cable. In this case, change this setting to “Standard”.
“Custom” is displayed for the setting item if our service engineers or custom installers has configured the HDMI signal format for this unit.
“4K Signal Format” can also be set by the following procedure. However, the menu screen is not displayed. Watch the display while configuring the setting.
Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same time for at least 3 seconds.
“V.Format:<PAL>” appears on the display.
Press the main unit's DIMMER.
“4K :<Standard>” appears on the display.
Use the main unit's ZONE2 SOURCE or INTERNET RADIO and select the 4K Signal Format.
Press the main unit’s STATUS to complete the setting.