Overview

Connections

Speaker installation

Connecting speakers

Connecting a TV

Connecting a playback device

Connecting a USB memory device to the USB port

Connecting an FM/AM antenna

Connecting to a home network (LAN)

Connecting an external control device

Connecting the power cord

Settings

Limiting the operating zone with the remote control

Tips

Troubleshooting

Resetting factory settings

Resetting network settings

Appendix

About HDMI

Video conversion function

Playing back a USB memory devices

Playing back a Bluetooth device

Playing back a file saved on a PC or NAS

Playing back Internet Radio

Personal memory plus function

Last function memory

Sound modes and channel output

Sound modes and surround parameters

Types of input signals, and corresponding sound modes

Explanation of terms

Trademark information

Setting procedure

Enable the HDMI Control function of this unit.

Set “HDMI Control” to “On”. link

Turn the power on for all the devices connected by HDMI cable.

Set the HDMI Control function for all devices connected by HDMI cable.

Please consult the operating instructions for the connected devices to check the settings.

Carry out steps 2 and 3 should any of the devices be unplugged.

Switch the television input to the HDMI input connected to this unit.

Switch the input source of this unit to check that video from the player connected by HDMI is played back correctly.

When you turn the TV’s power to standby, check that the power of this unit also goes to standby.

NOTE

Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.